ClassTech: Power-up the projection system


  • To provide instruction on using a control panel to power-up a projection system

User & Environment

  • Faculty, Instructor, Student
  • Classroom


  • Control panel
  • Projection system
  • Standard technology package


  1. Locate the control panel on the top-left corner of the teacher's station—if the panel is dark, touch the center to wake

    Image indicates location of flip-top touch panel in top-left corner of teacher's station
  2. Locate and press the POWER button on the control panel
  3. Some older style touch panels may prompt you for a code to enter. If prompted, enter 6015 and then press the Enter button on the screen
  4. Wait for the system to power-up—this may take a few minutes
  5. Once the system is on, select the input source you want to use
    NOTE: To use the resident PC, press COMPUTER

    Image of touch panel after start-up is complete, before input source selected



  • Power-down the projection system when you are finished using the equipment
  • Something not working? Our general troubleshooting guide for a projection system lists all the little things you should check before you panic
  • If you need immediate help, locate the phone in the room and dial 9-7900, and then press 9


Was this helpful?
0 reviews


Article ID: 18276
Thu 11/10/16 3:38 PM
Fri 7/12/19 2:05 PM