Pair with transmittor base / RevoLabs Wireless Microphone

Problem

  • How do I pair a Revolabs Wireless Microphone to the Base Station?

Scope

  • In addition to closed circuit cameras, wireless microphones are utilized for subject observation in PSY234B (BEAR Lab)
  • Occasionally the Revolabs wireless microphones do not connect properly and need to be paired with the base station

Resolution

  1. Turn the microphone OFF (no LED activity). If the microphone is ON, press and hold the Mute button (single button on front of unit) for 10 seconds until the LED turns solid RED, and then release the button to turn the unit off (do not release the button when you hear two beeps)
  2. Place the microphone unit in to pairing mode by holding the Mute button down for seven seconds. The LED will turn solid RED. Release the Mute button. The microphone is now in pairing mode
  3. Within one minute, push and hold the button for the desired channel on the Base Station for seven seconds until the LED turns solid red, and then release. The LED for that channel will be solid red until pairing starts, as indicated by a quick GREEN flash, then switching to flashing RED on both the microphone and the Base Station (muted audio). Pairing is now complete

Notes

  • Microphones are always muted (flashing RED LED) when they are removed from the Charger Base and the Mute button needs to be pressed to make it “live” (flashing GREEN LED)
  • A microphone that is not paired will be indicated by a cycling RED-GREEN LED pattern. A Base Station channel that is not paired to a microphone will not show any activity on the channel LED (make sure unit is first powered on by observing GREEN backlit front panel display)
  • When channels are paired, both microphone and channel LEDs will flash RED as microphones are removed from the Charger Base and flash GREEN when un-muted. Remember that only one microphone can be paired to any single Base Station channel
  • Complete hardware specifications (plus pictures of microphones and base station) and setup available here

Notes

  • Microphones are always muted (flashing RED LED) when they are removed from the Charger Base and the Mute button needs to be pressed to make it “live” (flashing GREEN LED)
  • A microphone that is not paired will be indicated by a cycling RED-GREEN LED pattern. A Base Station channel that is not paired to a microphone will not show any activity on the channel LED (make sure unit is first powered on by observing GREEN backlit front panel display)
  • When channels are paired, both microphone and channel LEDs will flash RED as microphones are removed from the Charger Base and flash GREEN when un-muted. Remember that only one microphone can be paired to any single Base Station channel
  • Complete hardware specifications (plus pictures of microphones and base station) and setup available here

User

  • PSY Faculty, Staff, Students

System

  •  (no asset record): Revolabs HD Single/Dual Wireless Microphone System ​​
    • Revo wireless microphone

 

Print Article